Table of Contents
Advertisement
Using the Keyboard and Mouse
From the login screen:
1.
2.
3.
From the Linux desktop:
1.
2.
Choosing the Controller Device
In any VN-Matrix system, one device needs to be configured as a controller. The
controller acts as a central point of reference for each device, manages all of the system
communications to every matrix device present, and also serves the web-based control
interface to the user.
NOTE: The VNM Recorder is configured as a controller when shipped. The controller
The controller can be one of the following devices.
•
•
•
When a controller device has been chosen, all devices within the VN-Matrix system must
reference the IP address of the controller device. When configuration of the VN-Matrix
system is complete, the IP address of the controller device can be entered into a suitable
web browser running on any PC or laptop connected to the VN-Matrix network.
For information on how to configure the VNM Enterprise Controller, see the VNM Enterprise
Controller User Guide. For information on how to configure the VN-Matrix encoders and
decoders, see the VN-Matrix 200 Series User Guide, VN-Matrix 225 Series User Guide,
VN-Matrix 300 User Guide, and the VN-Matrix 325 User Guide.
Click on either
or
Shut Down
The recorder opens a prompt asking for confirmation of the selected request.
The recorder takes approximately 20 to 30 seconds to complete the request.
From the menu bar on the desktop, select
The recorder opens a prompt containing four options.
•
Hibernate
•
Restart
•
Cancel
•
Shut Down
Select one of the options as desired. If no option is selected within 60 seconds, the
recorder shuts itself down (see figure 10).
Figure 10.
Mouse and Keyboard Shut Down Confirmation Window
address is set to the same value as the eth0 port (192.168.254.254).
VN-Matrix 200, 225, 300, or 325 device which is suitable for small network systems
VNM Recorder which is suitable for small network systems
VNM Enterprise Controller which is suitable for large network systems
VNM Recorder • Recorder Configuration and Hardware Setup
as required.
Restart
System > Shut Down...
16
Advertisement
Table of Contents
