Outputs; Naming An Output; Output Building Blocks - Extron electronics XMP 240 C AT User Manual

Outputs

There are 48 AT and Expansion outputs are available in the
these outputs can also be transmitted onto the Dante network.
Figure 76.

Naming an Output

1.
2.
3.

Output Building Blocks

Extron building blocks are a quick configuration tool that can significantly reduce
configuration time. A building block is a collection of processor and gain settings for an
input or output processing chain. These building blocks have been built by Extron based on
extensive use and testing with each intended application or specific device.
Figure 80.
Outputs Panel
Click the output name field.
Figure 77. Output Name Field
Delete the text and type the desired output name.
Figure 78. New Output Name
Press the < > key or navigate away from the field to confirm and apply the new
Enter
output name. Press the <
Down Arrow
field.
Figure 79. Renamed Output
NOTE: Follow the same procedure to edit an Output name.
Accessing Building Blocks on an Output
panel. Signals routed to
Outputs
> key to navigate to and highlight the next name
XMP 240 C AT • DSP Configurator Software 51