Methods For Marking Items; Configuring Presets - Extron electronics XMP 240 C AT User Manual

Methods for Marking Items

Marked items are highlighted in green (see figure 92). There are four ways to mark items in
DSP Configurator:
• Mark All — Press <
Mark Group — Click and drag the cursor to create a box around a group of items
•
to mark them. Click and drag the cursor while holding the
around another group of items to mark them while keeping previous group marked.
Mark Series — Click the first item in the series to mark it, then press
•
the final item in the series. All items between the first and last items are marked.
Mark Multiple Individual – Click the first item to mark it and press
•
mark additional items anywhere in the main workspace.
Figure 92.

Configuring Presets

1. Create a configuration to be saved as a preset (see
page 10).
2.
Mark the items that will be included in the preset.
3. Select
4. From the
Preset Number
assigned read
maximum).
5. Click
OK
Figure 93.
NOTE: When a configuration file is pushed to a XMP 240 C AT, presets contained
within that file are available for recall from DSP Configurator or SIS commands.
6. The preset is saved and is available from the
main workspace.
Figure 94.
> on the keyboard to mark all items in the main workspace.
Ctrl+A
Marked Items Highlighted in Green
Tools > Presets > Save Preset
dialog box, enter the preset number (1 through 32) in the
Save a Preset
field (see figure 93,
. Enter a name into the
[unassigned]
( ) to save the preset.
3
Save a Preset Dialog Box
Presets Drop-Down
<Shift>
DSP Configurator Software
.
). Preset slots that do not already have a preset
1
Preset Name
drop-down menu at the top of the
Presets
XMP 240 C AT • Configuration Tools
key to create box
on
<Shift+Click>
to
<Ctrl+Click>
on
field ( , 12 character
2
68