Table of Contents
Advertisement
Changing an individual setting
Follow this procedure if you want to change only one setting on the scheduling table, either
for powering on or off, or for executive mode.
1.
In the
the "-" symbol in the cell that you want to change, in the desired day column. A single-
line
Set Schedule For
Figure 30,
Figure 30.
2.
From the drop-down menus in the
minutes, and am or pm for the power or lock mode setting.
3.
Click
Set
selected on the
Managing Files
The
File Management
from your computer or server. File names must contain valid alphanumeric characters or
underscores; spaces and special characters (symbols) are not allowed. Only personnel with
administrator access can view the
Uploading files to the web page
The IPL T PC1 has approximately 7.25 MB of space for IR drivers, custom web pages, and
other user files to be uploaded. The Bytes Left field shows how much user space remains
for uploading files.
To upload files:
1.
Select the
PC1 web page.
2.
On the
3.
On the
can be selected.) The file name and directory path appear in the
the File
or
Receptacle
Executive Mode
section appears above the
, shows the cell that was selected: receptacle powering off, on Monday.
1
Set Schedule For Field to Set Powering Off for a Single Receptacle
to enter your settings. The time that you entered appears in the cell that you
table.
Scheduling
screen allows you to upload and delete files, including IR drivers,
File Management
t tab (see figure 31,
File Managemen
page, click
File Management
window, locate and select a file to upload. (Only one file at a time
Choose file
screen.
Management
scheduling table, click on the time displayed or
Scheduling
section (
Set Schedule For
page and make changes.
on the next page) on the IPL T
1
to open a
Browse
Choose file
IPL T PC1 • HTML Configuration and Control
section.
), select the hour,
2
window.
field (
) on
Browse
2
38
Advertisement
Table of Contents
