Command And Response Table For Dsp Sis Commands - Extron electronics XMP 240 C AT User Manual

Command and Response Table for DSP SIS Commands

Command
Audio level control
NOTE: The command format is the same regardless of the control point, but the acceptable gain range varies
depending on the control point.
The mic/line input gain range is -18 dB to +24 dB in 0.1 dB increments when the source is set to a digital
•
input (for more on changing the input source, see
The pre-mixer gain and virtual return gain range is -100 dB to +12 dB in 0.1 dB increments.
•
The post-mixer trim gain range is -12 dB to +12 dB in 0.1 dB increments. Post mixer trim cannot be muted.
•
• The output attenuation gain range is -100 dB to 0 dB in 0.1 dB increments.
• All responses are shown with the XMP 240 C AT in Verbose mode 2 or 3.
Set gain level
Example 1
(input 1):
Example 2
(pre-mixer gain 1):
Read gain level
Example 1
(input 1) :
Example 2
(post-mixer gain 1) :
NOTE: Use the H parameter instead of the G parameter when setting or reading digital input gain level (for
more on changing the input source, see
Audio Mute
Audio mute
Audio unmute
Mute status
KEY:
= Target OID
X7@
= Gain value
X7#
= Mute status
X7$
ASCII command
(host to device)
Input Gain Block
E X7@ X7# }
G * AU
E }
H40000*120 AU
E }
G40100*-8 AU
E X7@ }
G AU
E }
H40000AU
E }
G60100AU
Input Gain Block
E X7@ }
M *1AU
E X7@ }
M *0AU
E X7@ }
M AU
See Object ID (OID) Number Tables
Levels use a 10x multiplier system with no decimal spaces. For
example, a level of +10.4 dB would be entered as
level of -3.2 dB would be entered as
= disabled
0
= enabled
1
Response
(device to host)
on page 24).
X7@ X7#]
DsG *
]
DsH40000*120
]
DsG40100*-8
X7@ X7#]
DsG *
]
DsH40000*25
]
DsG60100*55
on page 24).
X7@ ]
DsM *1
X7@ ]
DsM *0
X7@ X7$]
DsM *
XMP 240 C AT • Remote Control and Configuration
Additional description
X7@
Set gain on OID to a
X7#
value of dB.
Set the input 1 to a level of
+12.0 dB.
Set pre-mixer gain 1 to a
value of -0.8 dB.
X7@
Gain on OID is set to a
X7#
value of dB.
Input 1 gain is set to a
value of +2.5 dB.
Output 2, post mixer gain
is set to a value of +5.5 dB.
X7@
Mute audio at .
X7@
Unmute audio at .
on page 127
and a
104
.
-32
122