Figure 10
Flex/eFlex 2120 Machine Shown
1. Light mount
2. Flange-head bolt (5/16 x
1 inch)
3. Flange-head bolt (3/8
inch)
3. Use 2 flange-head bolts (5/16 x 1-1/2 inches), 2
washers, and 2 flange nuts (5/16 inch) to secure
a light mount to the right drive housing
11).
g206120
4. Flange nut (5/16 inch)
5. Flange nut (3/8 inch)
(Figure
1. Flange-head bolt (5/16 x
1-1/2 inch)
2. Washer
3. Drive housing
4. Remove the nut and the washer from each LED
light assembly, then use the nut and the washer
to secure the LED lights to each light mount
(Figure
12).
1. LED light
2. Light mount
6
Figure 11
4. Light mount
5. Flange locknut (5/16 inch)
Figure 12
3. Washer
4. Nut
g206121
g200370