Toro 04722 Operator's Manual

Tri-Roller
for Greensmaster
Model No. 04722—Serial No. 400000000 and Up
Setup
1
Installing the Tri-Roller
Units
No Parts Required
Procedure
1. Park the machine on a level surface, shut off the
engine, engage the parking brake, and remove
the key.
2. Position the tri-roller unit under the suspension
arm.
3. With the latches on the suspension-arm bar
pointing up (Figure
down so that the bar fits over the bar across the
top of the tri-roller unit
1. Latch—closed position
2. Suspension-arm bar
© 2018—The Toro® Company
8111 Lyndale Avenue South
Bloomington, MN 55420
®
1), push the suspension arm
(Figure 2).
Figure 1
3. Latch—open position
Register at www.Toro.com.
3300/3400 Series TriFlex
1. Suspension-arm bar
4. Close the latches down and around the tri-roller
unit and lock them in place
Note:
latches are properly locked in place.
5. Insert the motor into the left side of the tri-roller
unit (as viewed from the operator's position) and
pull the motor retaining bar on the tri-roller unit
toward the motor until you hear a "click" from
both sides of the motor
g018311
Form No. 3409-884 Rev B
® Traction Units
Operator's Manual
Figure 2
2. Tri-roller unit bar
(Figure
You will hear and feel a "click" when the
(Figure
Original Instructions (EN) All Rights Reserved *3409-884* B
Printed in the USA
g018312
1).
3).