Advertisement
Connecting the Spark-Plug Wire
800, 1000, 1600, and Flex 1820 and 2120
Series Machines
Connect the spark-plug wire to the terminal of the
spark plug; refer to
Figure 1
Spark-Plug Wire (page
Connecting the Battery
eFlex 1820 and 2120 Series Machines
Connect the T-handle connector of the battery
adapter-wire harness to the P04 connector of
the battery wire harness; refer to
Disconnecting the Battery (page
of
Disconnecting the
2).
Figure 2
of
2).
Operation
Operating the Light Switch
Press the rocker switch to turn the LED lights to the
O
or O
position; refer to
N
FF
1. O
position
N
2. O
position
FF
Using the LED Light Kit with the
Wireless Hour Meter Kit
If the LED light kit is used with the wireless hour meter
kit, refer to the wireless hour meter kit.
Note:
The use of the LED light kit with the wireless
hour meter kit may cause the LED lights to flicker
slightly at low idle.
15
Figure
31.
Figure 31
3. LED light switch
g211057
Advertisement
