Figure 26
eFlex 1820/2120 Machine Shown
1. Opening (control panel)
2. Rocker switch
5. Insert the switch into the opening in the control
panel until the switch snaps securely into the
panel
(Figure
26).
g032853
3. Notch (body—rocker
switch)
4. Back of the control panel
7
Installing the Cable Ties
Parts needed for this procedure:
10
Cable tie
Procedure
Important:
As you install the cable ties, ensure
that the wire harnesses have enough slack to
prevent stress points and are free from any
moving parts
1. Use 8 cable ties to secure the wire harnesses to
the machine
(Figure
Note:
Attach 4 cable ties to the light mounts
and 4 cable ties to the handle.
800, 1000, and 1600 Series Machine shown
1. Cable tie (8)
2. Use the remaining 2 cable ties as follows:
•
800, 1000, and 1600 Series machines:
Secure the LED light kit wire harness to the
harness of the machine with as shown in
Figure
28.
Note:
Perform this step for both sides of the
machine.
13
27).
Figure 27
2. Wire harness
g200658