Lpd Configuration; Http/Ftp Settings - Lexmark MB3442 User Manual

Use printer menus
Menu item
Active
Off*
On
Note: An asterisk (*) next to a value indicates the factory default setting.
LPD Configuration
Note: This menu appears only in network printers or printers that are attached to print servers.
Menu item
LPD Timeout
0–65535 seconds (90*)
LPD Banner Page
Off*
On
LPD Trailer Page
Off*
On
LPD Carriage Return Conversion
Off*
On
Note: An asterisk (*) next to a value indicates the factory default setting.

HTTP/FTP Settings

Menu item
Enable HTTP Server
Off
On*
Enable HTTPS
Off
On*
Force HTTPS Connections
On
Off*
Enable FTP/TFTP
Off
On*
Note: An asterisk (*) next to a value indicates the factory default setting.
Description
Let the printer join networks that require authentication before
allowing access.
Description
Set the time‑out value to stop the Line Printer Daemon (LPD) server
from waiting indefinitely for hung or invalid print jobs.
Print a banner page for all LPD print jobs.
Note: A banner page is the first page of a print job used as a
separator of print jobs and to identify the originator of the print job
request.
Print a trailer page for all LPD print jobs.
Note: A trailer page is the last page of a print job.
Enable carriage return conversion.
Note: Carriage return is a mechanism that commands the printer to
move the position of the cursor to the first position on the same
line.
Description
Access the Embedded Web Server to monitor and manage the printer.
Configure the Hypertext Transfer Protocol Secure (HTTPS) settings.
Force the printer to use the HTTPS connections.
Send files using FTP.
103