Snmp - Lexmark MB3442 User Manual

Use printer menus
Menu item
Restricted Server List Options
Block All Ports*
Block Printing Only
Block Printing and HTTP Only
MTU
Raw Print Port
1–65535 (9100*)
Outbound Traffic Maximum
Speed
Disabled*
Enabled
Enable TLSv1.0
On*
Off
Enable TLSv1.1
On*
Off
SSL Cipher List
Note: An asterisk (*) next to a value indicates the factory default setting.

SNMP

Note: This menu appears only in network printers or printers that are attached to print servers.
Menu item
SNMP Versions 1 and 2c
Enabled
Off
On*
Allow SNMP Set
Off
On*
Enable PPM MIB
Off
On*
SNMP Community
Note: An asterisk (*) next to a value indicates the factory default setting.
Description
Specify how the IP addresses in the list can access the printer functionality.
Note: This menu item appears only in the Embedded Web Server.
Specify a maximum transmission unit (MTU) parameter for the TCP connections.
Specify a raw port number for printers connected on a network.
Enable the printer maximum transfer rate.
Enable the TLSv1.0 protocol.
Enable the TLSv1.1 protocol.
Specify the cipher algorithms to use for the SSL or the TLS connections.
Description
Configure Simple Network Management Protocol (SNMP) versions 1
and 2c to install print drivers and applications.
100