Fax
Fax
Using the automatic document feeder and scanner glass
Automatic document feeder (ADF)
•
Use the ADF for multiple‑page or two-sided
documents.
•
Load an original document faceup. For multiple‑page
documents, make sure to align the leading edge
before loading.
•
Make sure to adjust the ADF guides to match the width
of the paper that you are loading.
Sending a fax
Using the control panel
1
Load the original document into the ADF tray or on the scanner glass.
2
From the home screen, touch Fax, and then enter the needed information.
3
If necessary, configure other fax settings.
4
Send the fax job.
Using the computer
Note: Make sure that the Universal Fax driver is installed.
For Windows users
1
With a document open, click File > Print.
2
Select the printer, and then click Properties, Preferences, Options, or Setup.
3
Click Fax > Enable fax, and then enter the recipient number.
4
If necessary, configure other fax settings.
5
Send the fax job.
Scanner glass
•
Use the scanner glass for single‑page documents,
book pages, small items (such as postcards or
photos), transparencies, photo paper, or thin media
(such as magazine clippings).
•
Place the document facedown in the corner with the
arrow.
50