Recommended Adjustments - Grizzly G0812 Owner's Manual

Recommended
Adjustments
The adjustments listed below have been per-
formed at the factory. However, because of the
many variables involved with shipping, we recom-
mend that you at least verify the following adjust-
ments to ensure accurate cutting results.
Step-by-step instructions on verifying these adjust-
ments can be found in SECTION 7: SERVICE
ADJUSTMENTS.
Factory adjustments that should be verified:
1. Downfeed Stop (Page 54).
2. Blade Tracking (Page 28).
3. Blade Guide Bearings (Page 55).
4. Squaring Blade to Table (Page 56).
-22-
Model G0812 (Mfd. Since 2/16)