Grizzly G0812 Owner's Manual page 51

Changing Coolant
Items Needed
10-Gallon Drain Pan .......................................... 1
Hex Wrench 8mm .............................................. 1
Disposable Rags ............................... As Needed
To change coolant:
1.
DISCONNECT MACHINE FROM POWER!
2.
Remove chip collection
Figure 79) from coolant tank.
3. Remove drain plug (see Figure 79), empty
tank contents into drain pan, and dispose of
fluid following federal, state, and fluid manu-
facturer requirements.
Figure 79. Coolant drain plug location.
Model G0812 (Mfd. Since 2/16)
4.
Qty
5.
6.
drawer (see
Chip
Collection
Drawer
Drain Plug
Thoroughly clean tank, pump with hot, soapy
water and dry.
Re-install drain plug, then refill tank with cool-
ant (refer to Adding Coolant on Page 48).
Replace chip collection drawer.
-49-