Grizzly G0812 Owner's Manual page 45

Items Needed
NLGI#2 Grease or Equivalent ........... As Needed
ISO 68 Oil (SB1365 or Equivalent) .... As Needed
Clean Shop Rags .............................. As Needed
1-Gallon Catch Pan ........................................... 1
Grease Gun ....................................................... 1
Blade Tension Leadscrew
Lube Type .. Model SB1365 or ISO 68 Equivalent
Oil Amount ...........................................1–2 Drops
Lubrication Frequency ...........8 Hrs. of Operation
Lubricate the tension leadscrew with 1–2 drops of
light machine oil daily (see Figure 63). Wipe off
excess oil with a clean rag.
Figure 63. Location to apply lubrication on blade
tension leadscrew.
Blade & Guides
Lube Type .. Model SB1365 or ISO 68 Equivalent
Oil Amount ...........................................1–2 Drops
Lubrication Frequency ...........8 Hrs. of Operation
Place one or two drops of light machine oil on
blade and guides daily, especially when cutting
cast iron, as no coolant is recommended.
Guides
Figure 64. Blade and guide lubrication points.
Model G0812 (Mfd. Since 2/16)
Qty
Tension
Leadscrew
Blade
Table & Vise
Lube Type .. Model SB1365 or ISO 68 Equivalent
Oil Amount ............................................Thin Coat
Lubrication Frequency ...........8 Hrs. of Operation
Keep the table, vise (see Figure 65), and other
machined surfaces rust-free with regular applica-
tions of a quality way oil.
Vise
Figure 65. Table and vise.
Vise Leadscrew
Lube Type ............. SB1365 or ISO 68 Equivalent
Oil Amount ............................................Thin Coat
Lubrication Frequency .........40 Hrs. of Operation
Use mineral spirits, shop rags, and a brush to
clean the vise leadscrew from underneath the
table. When dry, use a clean brush to apply a
thin coat of oil or grease to the leadscrew threads
(see Figure 66).
Leadscrew
Figure 66. Vise leadscrew lubrication area.
Table
-43-