DP-CL18
8.13. Main Control Board
(1)
Remove the 2 screws.
(2)
Slide out the main control board with the ROM board.
8.13.1. Main Control Board Shield Covers
Before performing the following steps, remove all covers, power supply unit and engine board shield cover.
(1)
Remove the screw (A).
(2)
Remove the 4 screws (B).
(3)
Remove the LSU earth plate.
(4)
Remove the 5 screws (C), 2 screw (D) and release the
cables from the clamper, then remove the main control
board shield cover assembly.
(5)
Remove the 10 screws.
(6)
Separate the main board shield cover from the main board
shield base cover.
(7)
Remove the main board guide rail from the main board
shield base cover.
146