Panasonic DP-CL18 Service Manual page 105

DP-CL18
7.2.5. Selecting of FTR Roller
There are four FTR rollers, three colors (yellow, magenta, cyan) and one for black. The changer solenoid is for selecting these FTR
rollers. When turning on the changer solenoid, the changer lever moves in the arrow (1) direction. The pin on the changer lever
moves the FTR cam slider in the same direction [arrow (2)]. This movement moves the FTR roller lift levers (see previous section
"FTR Roller Lift Mechanism") in the accumulator.
When monochrome printing, the part (B) is engaged with the projection (B) on the black FTR roller lift lever. The black FTR roller
lift lever only moves in the Arrow (B) direction and black FTR rollers are contacted with the accumulator belt.
When color printing, the changer solenoid is turned on, moving the FTR cam slider in the arrow (A) direction. The projection (A) is
engaged with the part (B). When the FTR cam slider moves to the Arrow (B) direction, the CMY and black FTR roller lift levers move
to the Arrow (B) at the same time. As a result, the FTR rollers for color (yellow, magenta, cyan) and black are in contact with the
accumulator belt at the same time.
105