Cisco UCS E Series Hardware Installation Manual page 9

Feature UCS-E160S-M3 Single-Wide E-Series
Servers
RAM 8 - 64 GB
2 DIMM slots, each with 8 GB, 16 GB or
32 GB VLP DDR4 RAM
RAID Hardware RAID 0 and 1
LSI MegaRAID SAS 3108 controller
Storage Type SATA, SAS, SSD, and External USB
HDD 2 SFF slots; Up to 2 TB each; refer to the
compatibility and ordering guide for more
information.
Supports 2 Drives
Storage Capacity Refer to the
Compatibility and Ordering Guide
information.
Internal Network 2 internal Gigabit Ethernet ports (Broadcom
Interface 5719)
External Interfaces 1 USB connector
2 RJ-45 10 Gigabit Ethernett Interfaces
(TE2 and TE3)
1 KVM port (supports VGA, 1 USB, 1
serial DB9)
Note
Router Platforms 4331,4351,4451
Maximum Number ISR 4331—1 E-Series Server
of E-Series Servers
ISR 4351—2 E-Series Server
ISR 4451-X—2 E-Series Server
5
All hardware drives within the E-Series Server must be installed with the same type of storage device: either all SAS drives or
all SATA drives.
Cisco UCS E-Series Servers and the Cisco UCS E-Series Network Compute Engine Hardware Installation Guide
5
Cisco UCS E-Series
for more
TE2 and TE3 interfaces support
only GE switch. 10GBps
interfaces can connect only to
devices with 1GBps speeds or
higher.
Hardware Information for the M3 E-Series Servers
UCS-E180D-M3 Double-Wide
E-Series Servers
16 - 128 GB
4 DIMM slots, each with 8 GB,
16 GB or 32 GB VLP DDR4
RAM
RAID 0, RAID 1, RAID 5, and
RAID 10
SATA, SAS, SSD, and External
USB
SAS 10K RPM, SATA 7200
RPM, and SAS SSD
Supports 4 Drives
Refer to the Cisco UCS E-Series
Compatibility and Ordering
Guide for more information.
2 x 1GBps (Internal)
2 USB connector
2 RJ-45 10 Gigabit Ethernett
Interfaces (TE2 and TE3)
1 KVM port (supports VGA, 1
USB, 1 serial DB9)
1 Management Port
Note TE2 and TE3
interfaces support
only GE switch.
10GBps interfaces
can connect only to
devices with 1GBps
speeds or higher.
4351,4451
ISR 4351—1 E-Series Server
ISR 4451-X—1 E-Series Server
UCS-E1120D-M3 Double-Wide
E-Series Servers
16 - 128 GB
4 DIMM slots, each with 8 GB,
16 GB or 32 GB VLP DDR4
RAM
RAID 0, RAID 1, RAID 5, and
RAID 10
SATA, SAS, SSD, and External
USB
SAS 10K RPM, SATA 7200
RPM, and SAS SSD
Supports 4 Drives
Refer to the Cisco UCS E-Series
Compatibility and Ordering
Guide for more information.
2 x 1GBps (Internal)
2 USB connector
2 RJ-45 10 Gigabit Ethernett
Interfaces (TE2 and TE3)
1 KVM port (supports VGA, 1
USB, 1 serial DB9)
1 Management Port
Note TE2 and TE3
interfaces support
only GE switch.
10GBps interfaces
can connect only to
devices with 1GBps
speeds or higher.
4351,4451
ISR 4351—1 E-Series Server
ISR 4451-X—1 E-Series Server
9