Cisco UCS E Series Hardware Installation Manual page 59

1. Load a compatible Cisco IOS image. See the "Cisco ISR 4000, E-Series Server, NCE, CIMC and Cisco
IOS Software Release Compatibility" section in the Release Notes for Cisco UCS E-Series Servers and
the Cisco UCS E-Series Network Compute Engine, Release 3.x.
2. Connect the NIM E-Series NCE to the network and then power up the router and the NIM.
3. Verify that the router recognizes the NIM E-Series NCE. See the
on page
Verifying NIM E-Series NCE Installation
Before You Begin
1. Install the NIM E-Series NCE into the router.
2. Load a compatible Cisco IOS image. See the "Cisco ISR 4000, E-Series Server, NCE, CIMC and Cisco
IOS Software Release Compatibility" section in the Release Notes for Cisco UCS E-Series Servers and
the Cisco UCS E-Series Network Compute Engine, Release 3.x.
3. Power on the NIM E-Series NCE.
Procedure
To verify the NIM E-Series NCE installation, use one of the following commands:
• To display a high-level overview of the entire physical system, use the show platform command:
Router# show
platform
Chassis type: ISR4351/K9
0/1
1/0
2
R0
F0
P0
P2
Slot
--------- ------------------- ---------------------------------------
0
1
2
R0
F0
• To verify that the router recognizes the server, use the show hw-module subslot all oir command:
Router# show hw-module subslot all oir
Module
------------- -------------------- ------------------------
subslot 0/0
subslot 0/1
subslot 1/0
Online Insertion and Removal NIM E-Series NCE
Online insertion and removal (OIR) provides uninterrupted network operation, maintains routing information,
and ensures session preservation on the Cisco ISR 4000 series. You can use online insertion and removal to
install or replace hardware without affecting system operations.
Cisco UCS E-Series Servers and the Cisco UCS E-Series Network Compute Engine Hardware Installation Guide
59.
UCS-EN140N-M2/K9 ok
UCS-E140DP-M1/K9 ok
ISR4351/K9 ok
ISR4351/K9 ok, active
ISR4351/K9 ok, active
PWR-4450-AC ok
ACS-4450-FANASSY ok
CPLD Version Firmware Version
14080523 15.4(3r)S1
14080523 15.4(3r)S1
14080523 15.4(3r)S1
14080523 15.4(3r)S1
14080523 15.4(3r)S1
Model
ISR4351-3x1GE
UCS-EN140N-M2/K9
UCS-E140DP-M1/K9
Verifying NIM E-Series NCE Installation,
3w5d
4w6d
5w2d
5w2d
5w2d
5w2d
5w2d
Operational Status
ok
ok
ok
Verifying NIM E-Series NCE Installation
59