Cisco UCS E Series Hardware Installation Manual page 22

Double-Wide E-Series Server Front Panel and Components
11 Hard disk drives (HDD0 and HDD1)
13 (Optional) Alternate PCIe assembly
with 4 Gigabit Ethernet ports
Note
The following figure shows the Front Panel of the Double-Wide E-Series Servers UCS-E180D-M3 and
UCS-E1120D-M3.
Figure 6: Front Panel of the Double-Wide E-Series Servers UCS-E180D-M3 and UCS-E1120D-M3
1 Power switch
3 LEDs
5 Management Port
7 Gigabit Ethernet ports (TE2 and
TE3)
9 Hard disk drives (HDD0 and
HDD1)
Cisco UCS E-Series Servers and the Cisco UCS E-Series Network Compute Engine Hardware Installation Guide
22
Use with PCIe assembly
modules only.
2
4
6
8
10
12 (Optional) Alternate PCIe assembly with FCoE port
Use with PCIe assembly modules only.
Note
Reset switch
This resets all CMOS settings.
Note
Console port
USB port 0
Each port provides up to 500 mA of current. Devices that require
higher power, such as CD/DVD ROM, need their own external
power.
Hard disk drives (HDD3 and HDD2)
USB port 1
Each port provides up to 500 mA of current. Devices that require
higher power, such as CD/DVD ROM, need their own external
power.