Cisco UCS E Series Hardware Installation Manual page 15

Danger Installation of the equipment must comply with local and national electrical codes. Statement 1074
Danger This unit might have more than one power supply connection. All connections must be removed to de-energize
the unit. Statement 1028
Danger This equipment must be grounded. Never defeat the ground conductor or operate the equipment in the absence
of a suitably installed ground conductor. Contact the appropriate electrical inspection authority or an electrician
if you are uncertain that suitable grounding is available. Statement 1024
Danger When installing or replacing the unit, the ground connection must always be made first and disconnected last.
Statement 1046
Danger Do not use this product near water; for example, near a bath tub, wash bowl, kitchen sink or laundry tub, in
a wet basement, or near a swimming pool. Statement 1035
Danger
Never install telephone jacks in wet locations unless the jack is specifically designed for wet locations.
Statement 1036
Danger
Never touch uninsulated telephone wires or terminals unless the telephone line has been disconnected at the
network interface. Statement 1037
Danger Avoid using a telephone (other than a cordless type) during an electrical storm. There may be a remote risk
of electric shock from lightning. Statement 1038
Danger To report a gas leak, do not use a telephone in the vicinity of the leak. Statement 1039
Danger Class 1 laser product. Statement 1008
Cisco UCS E-Series Servers and the Cisco UCS E-Series Network Compute Engine Hardware Installation Guide
Safety Warnings
15