Adjusting The Height Of The Cassette; Adjusting The Height Of The Cassette Automatically; Adjusting The Height Of The Cassette Manually - Ricoh Ri 100 Manual

2. Differences Related to Parts Replacement

Adjusting the Height of the Cassette

Adjusting the Height of the Cassette Automatically

• Remove the garment from the cassette before performing auto adjustment. Do not perform auto
adjustment while the garment is on the cassette.
• When you perform auto adjustment, the height of the cassette is adjusted appropriately according
to the cassette that is set. Perform auto adjustment again every time a different cassette is set.
• When you perform auto adjustment, the height of the cassette is adjusted so it is suitable for loading
thin garments, such as T-shirts. When loading thick garments in the cassette, fine-tune the height of
the cassette using the [Adjust Height ] key after sending the print job. For details about how to
adjust the height of the cassette manually, see the next section.
When printing starts, the machine adjusts the height of the cassette according to the height value
specified in the [Maintenance] menu. If the printed image is blurry or there is dust stuck to it, or the height
of the cassette may not be adjusted appropriately, adjust the height of the cassette using the
[Maintenance] menu.
1. Load the cassette without a garment on it.
2. Press the [ /Menu] key.
3. Press the [ ] or [ /Menu] key to display [Maintenance], and then press the [#Enter] key.
4. Press the [ ] or [ /Menu] key to display [Height Adjust], and then press the [#Enter] key.
5. Press the [ ] or [ /Menu] key to display [Auto Adjust], and then press the [#Enter] key.
6. Check that "Press # to start" is displayed, and then press the [#Enter] key.
Auto adjustment starts after the cassette is loaded into the machine. After auto adjustment is
completed, the cassette returns and stops in position so that you can see the cassette positioning
line on the left side of it.
• The value set by adjustment is stored in [Manual Adjust] in the [Maintenance] menu.
• If an error occurs during auto adjustment, perform the operation from Step 1 again.

Adjusting the Height of the Cassette Manually

Even though a similar item is described in "Notes for Users" (J088-6648), read this section that it
contains the latest information.
110