Ricoh Ri 100 Manual page 105

1. Check that the top cover is closed.
2. Press the [ /Menu] key.
3. Press the [ ] or [
key.
<Menu>
Maintenance
4. Press the [ ] or [
[#Enter] key.
<Maintenance>
Move Print-Heads
5. Open the top cover.
6. Remove stuck foreign objects.
Remove the foreign objects carefully.
7. Check that there are no foreign objects, and then close the top cover.
The machine turns off and on automatically, and then it returns to the usual condition.
8. Press the [ /Menu] key.
9. Press the [ ] or [
key.
<Menu>
Maintenance
10. Press the [ ] or [
key.
<Maintenance>
Nozzle Check
11. Press the [Start] key.
A test pattern is printed.
12. Press the [Escape] key.
Check the printed test pattern.
Normal
/Menu] key to display [Maintenance], and then press the [#Enter]
/Menu] key to display [Move Print-Heads], and then press the
/Menu] key to display [Maintenance], and then press the [#Enter]
/Menu] key to display [Nozzle Check], and then press the [#Enter]
Cleaning
103