Moving The Print-Heads - Ricoh Ri 100 Manual

2. Differences Related to Parts Replacement
• There are double-sided adhesive tapes [C] at both ends of each cleaning felt.
• Make sure that the cleaning felts are straightened.

Moving the Print-Heads

If a foreign object remains inside the machine, move the print head and remove it. The machine reboots
when the operations are completed. Print a [Nozzle Check] test pattern to check whether the print head
nozzles are clogged.
• Do not open the cover while the machine is operating and keep your hands or fingers clear of the
machine. Doing so might cause your hands or fingers to get trapped in the machine, potentially
causing injury.
• After moving the print head and turning the power off, be sure to turn the power back on. Do not
keep the print head moving.
• Do not touch the toothed rubber belt and ink tube. Moreover, pay attention not to have your
sleeves caught on the ink tube or cables.
1. Toothed rubber belt
2. Ink tubes
• When the cartridge runs out, the machine will not operate. After replacing the ink cartridge,
perform this operation.
• Do not use tools with sharp tips to remove stuck foreign objects. Using it may cause a failure.
102