Boards; Relay Board; Hrb (Head Relay Board) - Ricoh Ri 100 Manual

Boards

Relay Board

1. Remove the left lower cover.
2. Remove the relay board [A].
Unlock the FFC lock [B], and disconnect the FFC.

HRB (Head Relay Board)

1. Remove the canopy cover.
2. Insert the tip of a screwdriver into the hole [A] and turn it counter-clockwise to rotate the
lower triangle [B] up to the other triangle until they are aligned.
When the triangles are aligned, the carriage is unlocked.
(page 52 "Left Lower
(page 54 "Canopy Cover")
Cover")
Boards
81