*2: The time it takes to switch out from energy saving functions and power consumption may differ depending on
the conditions and environment of the machine.
*3: Its weight increases by approximately 1.5 kg after design change. When moving the machine, as
same as the model before design change, two or more people are required to lift the printer.
Minimum Space Requirements
A space of 10 cm (4 inches) behind the machine's rear (e) is required.
a.
At least 27 cm (10.7 inches)
b.
At least 10 cm (4 inches)
c.
At least 53 cm (20.9 inches)
d.
At least 25 cm (9.9 inches)
e
At least 10 cm (4 inches)
Consumables
Fan filter is added as a consumable.
Code
J934-00
RICOH Fan Filter Type 1
Also, product codes for other consumables are changed. For details, see page 29 "Consumables".
Differences between the Initial Lot and the Model Supporting the Design Change
Product Name
19