Ricoh Ri 100 Manual page 87
Hide thumbs
Also See for Ri 100:
- Safety information manual (404 pages) ,
- Operating instructions manual (260 pages) ,
- Manual (176 pages)
Table of Contents
Advertisement
• When attaching the HRB, be very careful not to fold, bend, or strongly warp the horizontal
encoder strip. Also, do not deform the slit on the strip. If a problem occurs, replace the horizontal
encoder strip with a new one.
1.
Connect the 2 connectors to the HRB [A], and route the harnesses [B] along the harness
guides.
2.
Attach the HRB, making sure that the sensor groove [A] on its back is engaged with the
horizontal encoder strip [B].
Boards
85
Advertisement
Table of Contents
