Figure 50. Base enclosure I/O module LEDs
Table 4. Base enclosure I/O module LEDs
LED
Port link
Power fault
Power down the node
Power down the node as described in
Remove a faulted I/O module
Steps
1. Pull the trigger mechanism on the I/O module handle to release it.
CAUTION:
Do not pull the node from the base enclosure. Pulling the node from the base enclosure disrupts the
system cache.
Figure 51. Releasing the I/O module
2. Gently pull the I/O module from the slot.
48
Base enclosure service procedures
Location
Power control
procedures.
State
Description
Green or blue
Link up
Off
Link down
Green
Power on
Amber
Power fault