Table of Contents
Advertisement
Debido a su considerable peso, la instalación del compartimento en el bastidor deben realizarla siempre dos personas.
Para evitar daños personales o en el equipo, el compartimento no debe levantarse ni instalarse en el bastidor sin la ayuda
de un elevador mecánico o de otra persona.
Steps
1. Lift the enclosure and slide it onto the rails from the front of the cabinet.
2. Push the system into the rack until the slam latches engage and lock the system into the rack.
Ensure that the enclosure is flush with the front of the rack, fully seated in the cabinet, and does not slide out.
Figure 2. Installing the system in the enclosure
Cable the base enclosure appliance to switches
For switch cabling information, refer to the PowerStore Network Planning Guide.
Connect power cables
Prerequisites
If you are also installing an expansion enclosure, wait to power up the base enclosure until after you have powered up the expansion
enclosure.
Steps
1. Plug each power cable into the base enclosure power supply.
Install a new base enclosure and optional expansion enclosure
11
Hide quick links:
Advertisement
Table of Contents
