Overview Of Configuration; Description Of Operating Modes - Siemens SIPART PS2 Series Operating Instructions Manual

See also
Display (Page 95)
6.2.3

Overview of configuration

The following picture illustrates the handling of operating modes such as "Configuration" and
"Initialization mode":
Figure 6-4
6.2.4

Description of operating modes

P manual mode
Note
Delivery state
The "P manual mode" is preset for the positioner in the delivery state.
The display of the positioner shows the current potentiometer position in the upper line. "NOINI"
blinks in the second line of the display.
Move to the actuator with the
Switch to "Configuration" mode to adapt the actuator to the positioner.
Alarms or position feedbacks can be triggered after initializing the positioner completely.
SIPART PS2 with 4 to 20 mA/HART
Operating Instructions, 11/2019, A5E00074631-AE
Overview of the "Configuration" operating mode
or buttons.
Operating
6.2 Operating modes
99