Ricoh FAX2900L Operator's Manual page 6

Notice
R CAUTION:
Use of controls, adjustments or performance of procedures other than those
specified herein may result in hazardous radiation exposure.
Shielded interconnect cables must be employed with this equipment to ensure
compliance with the pertinent RF emission limits governing this device.
Although this equipment can use either loop disconnect or DTMF signalling,
only the performance of the DTMF signalling is subject to regulatory require-
ments for correct operation. It is therefore strongly recommended that the equip-
ment is set to use DTMF signalling for access to public or private emergency
services. DTMF signalling also provides faster call set up.
Direct (or indirect reflected eye contact with the laser beam may cause serious eye
damage. Safety precautions and interlock mechanisms have been designed to prevent
any possible laser beam exposure to the operator.
Note
Some illustrations may be slightly different from your machine.
Certain options may not be available in some countries. For details, please
contact your local dealer.
In accordance with IEC 60417, this machine uses the following symbols for the
main power switch:
• a means POWER ON.
• b means POWER OFF.
Warning:
Changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment.
Examples Of Indications
Symbols R mean a situation that requires you take care.
Symbols v mean "Hot surface".
Symbols n mean "Do not touch".
i