Ricoh FAX2900L Operator's Manual page 237

BABT Notice
b) External control software or
external
which causes the operation of
the terminal or associated call
set-up equipment to contravene
13
the requirements of the approv-
al.
All apparatus connected to this
terminal and thereby connected
directly to the British Telecom
public switched telephone net-
work must be approved appa-
ratus as defined in Section 22 of
the British Telecommunications
Act 1984.
K This apparatus has been ap-
proved for the use of the follow-
ing facilities:
• Storage of Telephone Num-
bers for Retrieval by Prede-
termined Code
• Automatic Call Initiation
• Operation in the Absence of
Proceed
though not Detected)
• Automatic Dialling Facilities
• Auto-Calling Facility
• Loudspeaking Facility
• Series Connection Facility
• Automatic Storage of Last
Number Dialled
• Tone Detection - Busy Tone
• Repeat Attempt Facilities:
Multiple (Automatic)
• Auto Clear from Call Origi-
nating End
• Integral Modem
Any other usage will invalidate
the approval of the apparatus if
as a result it then ceased to con-
form to the standard against
which approval was granted.
222
control apparatus
Indication (Al-
L
Connection to a PBX - it cannot
be guaranteed that the appara-
tus will operate correctly under
all possible conditions connec-
tion to compatible PBX's. Any
cases of difficulty should be re-
ferred in the first instance to the
supplier of the telephone appa-
ratus.
M This apparatus provides an off
hook detector and switching of
the line between the telephone
and modem. The voltage drop
introduced by this apparatus
into the loop connection be-
tween the main telephone and
the network at a current of 40ma
d.c. is 0.3 volts.
N Only apparatus
with EN60950 may be connect-
ed to the series socket. Any in-
terconnection between
above socket and other connec-
tions, directly or by the way of
other apparatus, may produce
hazardous conditions on the BT
network. Advice should be ob-
tained from a competent engi-
neer before any such connection
is made.
O The apparatus is supplied with
a connection to the Public
switched telephone network,
which is refered to as a TNV cir-
cuit. There is also an optional
printer port that may be fitted,
which is refered to as a SELV
circuit.
Please ensure that the TNV cir-
cuit is only connected to anoth-
er TNV circuit and that the
SELV circuit is only connected
to other SELV circuit.
The apparatus does not recog-
nise a secondary proceed indi-
cation.
conforming
the