Table of Contents
Advertisement
Specifies whether logical unit numbers are supported.
c
Include in BIOS Scan
Specifies whether the device is to be scanned when SCSI
BIOS starts.
c
Advanced Configuration Options
Sets up detailed data on the SCSI controller.
c
Reset SCSI Bus at IC Initialization
Specifies whether or not to reset the SCSI bus during the SCSI
controller resetting process.
c
Display <Ctrl><A> Message
During BIOS Initialization
Sets data to be displayed in the SCSI Utility startup message.
c
Extended BIOS Translation for
DOS Drive > 1Gbyte
Specifies whether extended BIOS is to be enabled or disabled
for a DOS drive with a disk capacity exceeding 1 GB.
c
Verbose/Silent Mode: Verbose
Controls the data displayed during startup.
c
Host Adapter BIOS
Enables or disables the Host SCSI Adapter BIOS.
c
Domain Validation
Enables or disables the Domain Validation.
c
Support Removable Disks Under
BIOS as Fixed Disks
Specifies whether removable disks are to be supported under
SCSI BIOS.BIOS
c
Support for Int13 Extensions
Enables or disables Int13 Extension.
System Configuration Setup
SCSI Utility
: Yes
: Enabled
: Enabled
: Enabled
: Enabled
: Enabled
: Boot Only
: Enabled
155
Advertisement
Table of Contents
