Toshiba Magnia Z300 User Manual page 262

240
Display
ALARM (31)
Ex. Disk1 +5.0V low.
ALARM (32)
Ex. Disk1 +5.0V high.
ALARM (33)
Ex. Disk1 +12.0V low.
ALARM (34)
Ex. Disk1 +12.0V high.
ALARM (35)
Ex. Disk1 FAN1 RPM slow.
ALARM (36)
Ex. Disk1 FAN2 RPM slow.
ALARM (37)
Ex. Disk1 temp1 high.
ALARM (38)
Ex. Disk1 AC lost.
ALARM (39)
Ex. Disk1 power sag.
ALARM (40)
Ex. Disk1 power supply fault.
ALARM (41)
Ex. Disk1 chassis intrusion.
ALARM (42)
Ex. Disk1 fuse blow out.
ALARM (43)
Ex. Disk2 +3.3V standby low.
ALARM (44)
Ex. Disk2 +3.3V standby high.
ALARM (45)
Ex. Disk2 +5.0V low.
ALARM (46)
Ex. Disk2 +5.0V high.
ALARM (47)
Ex. Disk2 +12.0V low.
ALARM (48)
Ex. Disk2 +12.0V high.
ALARM (49)
Ex. Disk2 FAN1 RPM slow.
ALARM (50)
Ex. Disk2 FAN2 RPM slow.
Meaning of Message
Low voltage error of External Hard Drive Unit 1+5.0V power
supply.
High voltage error of External Hard Drive Unit 1+5.0V power
supply.
Low voltage error of External Hard Drive Unit 1+12.0V power
supply.
High voltage error of External Hard Drive Unit 1+12.0V power
supply.
The External Hard Drive Unit 1 fan 1 slow rpm error has
occurred.
The External Hard Drive Unit 1 fan 2 slow rpm error has
occurred.
The External Hard Drive Unit 1 high temperature error 1 has
occurred.
Power interruption reset was detected on External Hard Drive
Unit 1..
Momentary power interruption was detected on External Hard
Drive Unit 1.
External Hard Drive Unit 1 power supply error.
An External Hard Drive Unit 1 cover has been opened.
The External Hard Drive Unit 1 fuse has blown.
Low voltage error of External Hard Drive Unit 2+3.3V standby
power supply.
High voltage error of External Hard Drive Unit 2+3.3V standby
power supply.
Low voltage error of External Hard Drive Unit 2+5.0V power
supply.
High voltage error of External Hard Drive Unit 2+5.0V power
supply.
Low voltage error of External Hard Drive Unit 2+12.0V power
supply.
High voltage error of External Hard Drive Unit 2+12.0V power
supply.
The External Hard Drive Unit 2 fan 1 slow rpm error has
occurred.
The External Hard Drive Unit 2 fan 2 slow rpm error has
occurred.