Table of Contents
Advertisement
Remote Management and Front Panel Display Setup Tool
c
[To set up the IP address]
1 When the menu appears, select [1] or [2].
The currently held information appears as follows, and the sys-
tem waits for entry of the new update values.
*** Setup LANx IP Address ***
Current LANx IP Address = nnn.nnn.nnn.nnn
Change LANx IP Address ? [y/n]
Current LANx IP Address
Please Input (xxx.xxx.xxx.xxx)>>
Change LANx IP Address Really ? [y/n]
2 Enter <Y> at "Change LANx IP Address? [y/n]", and enter the
new IP address at "Please Input (xxx.xxx.xxx.xxx)>>".
If you enter <N> at "Change LANx IP Address? [y/n]", the
selection screen is redisplayed.
3 "Change LANx IP Address Really [y/n]?" appears. Enter
<Y>.
"Complete!" is displayed, and the Setup Remote Management
Setup Menu screen is redisplayed.
If you enter <N> at "Change LANx IP Address Really? [y/n]",
the setup is not changed and the selection screen is redisplayed.
c
[To set the subnet mask]
1 When the menu appears, select [3] or [4].
System Configuration Setup
>> nnn.nnn.nnn.nnn
157
Advertisement
Table of Contents
