Starting The Setup Utility - Toshiba Magnia Z300 User Manual

Starting the setup utility

The BIOS screen will appear when the server is started.
Phoenix BIOS 4.0 Release X.X.X.XX
Copyright 1985-2000 Phoenix Technologies Ltd.,
All Rights Reserved
BIOS Version X.X
VIA Apollo Pro133AX ( VT82C694X + VTA686B )
CPU = Pentium (R) III Processor XXX MHz
XXXXXXXX System RAM Passed
XXXXXXXX Extended RAM Passed
0256K Cache SRAM Passed
System BIOS Shadowed
Video BIOS Shadowed
UMB upper limit segment address : XXXX
Keyboard Detected
Mouse initialized
Press <F2> to enter SETUP
To start the BIOS Setup Utility, press the F2 key immediately after
the BIOS screen appears. The message "Entering Setup..."
appears on the screen. After the system completes the Power-On-
Self-Test (POST), the BIOS Setup Utility is loaded.
NOTE: If F2 is not pressed, the operating system is loaded
after the Power-On-Self-Test (POST) sequence is completed.
System Configuration Setup
BIOS setup utility
139