Toshiba B-SA4TP SERIES Owner's Manual page 73

2.PRINTER SETUP
2.11 Threshold Setting
(Cont.)
PAUSE
B-SA4T V1.0
R
ONLINE
B-SA4T V1.0
7. Select the sensor to be adjusted by using the [FEED] key.
REFLECTIVE
B-SA4T V1.0A
Black mark sensor
8. Press and hold the [PAUSE] key until more than 1.5 labels (tags)
have been issued.
The media will continue to be fed until the [PAUSE] key is released.
(An automatic threshold setting for the selected sensor is completed
by this operation.)
1. Failure to feed more than 1.5 labels may result in an incorrect
threshold setting.
2. While the Top Cover is raised, the [PAUSE] key does not work.
9. Press the [RESTART] key.
10. The printer returns to online mode.
Send an issue command from the host computer to the printer.
A paper end error cannot be detected during paper feed.
E2-60
ENGLISH VERSION EO1-33048
2.11 Threshold Setting
TRANSMISSIVE
[FEED]
B-SA4T
Feed gap sensor
NOTES:
NOTE:
V1.0A