Toshiba B-SA4TP SERIES Owner's Manual page 36

2. PRINTER SETUP
2.7.2 Parameter Setting
(Cont.)
Plug & Play
This parameter is to enable or disable the plug & play function.
As "OFF" has been chosen as default, change it when this function is
used.
If the printer and the PC are connected by USB, plug & play will be
automatically enabled, regardless of the setting of this parameter.
[RESTART]
[FEED]
After making a choice, press the [PAUSE] key.
E2-23
ENGLISH VERSION EO1-33048
2.7 Setting an Operating Environment
<2>PARAMETER SET
PLUG & PLAY OFF
PLUG & PLAY OFF
PLUG & PLAY ON