2. PRINTER SETUP
2.3 Loading the Media
(Cont.)
NOTE:
Be sure to close the Strip Unit
completely. Failure to do this may
cause a paper jam.
(2) Press down the Release Bar to open the Strip Unit.
Strip Unit
(3) Remove enough labels from the leading edge of the media to leave
300mm of backing paper free.
(4) Pass the backing paper through the opening under the Backing Paper
Feed Roller. Then, close the Strip Unit until it clicks.
Backing Paper
Backing Paper Feed Roller
(5) Insert the leading edge of the backing paper into the slot of the Front
Cover.
(6) Close the Front Cover and the Top Cover.
Slot
E2- 9
Release Bar
Front Cover
ENGLISH VERSION EO1-33048
2.3 Loading the Media
Click
Top Cover