Toshiba B-SA4TP SERIES Owner's Manual page 35

2. PRINTER SETUP
2.7.2 Parameter Setting
(Cont.)
Parallel (Centronics) Interface
Web Printer Function when
using TCP/IP (LAN)
NOTE:
To enable this function, an IP
address needs to be set, also. Refer
to Section 2.7.3 IP Address Setting
(TCP/IP).
This parameter is to choose an ACK/BUSY timing of the parallel
interface.
"TYPE1" has been chosen as default, but if a communication error occurs
or a communication is not properly made, change to "TYPE2".
[RESTART]
[FEED]
After making a choice, press the [PAUSE] key.
This parameter is to enable or disable the web printer function which is
available when the printer and your host computer is connected through
TCP/IP.
As "OFF" has been chosen as default, change to "ON" when this function
is used.
[RESTART]
[FEED]
After making a choice, press the [PAUSE] key.
E2-22
ENGLISH VERSION EO1-33048
2.7 Setting an Operating Environment
<2>PARAMETER SET
ACK/BUSY TYPE1
ACK/BUSY TYPE1
ACK/BUSY TYPE2
<2>PARAMETER SET
WEB PRINTER OFF
WEB PRINTER OFF
WEB PRINTER ON