Environment - Ricoh FT3020 Field Service Manual

1A.

Environment

1. Temperature Range :
2.
Humidity Range
Ambient Illumination :
3 .
4. Ventilation
5. Ambient Dust
Room Size
6.
7. If the installation place is air-conditioned or heated, place the machine:
a. Where it will not be subjected to sudden temperature changes from low to high, or vice versa.
b. Where it will not be directly exposed to cool air from an air conditioner in the summer.
c. Where it will not be directly exposed to reflected heat from a space heater in winter.
Avoid placing the copier in an area filled with corrosive gas.
8.
9. Avoid any area higher than 2,000m (6,500 feet) above sea level.
10. Place the copier on a strong and level base.
11. Avoid any area where the copier may be subjected to frequent strong vibration.
10°C to 30°C (50°F to 86°F)
15% to 90% RH
:
Less than 1,500 Iuxs (Do not expose to direct sunlight)
: Room air should turn over at least 3 times/hour.
: Less than 0.15 mg/m
: More than 10m³ (13.4 yd
3
(4 x 100¯³ Oz/yd³)
3
)
1-1