Precautions For Handling; Checking The Including Items - SATO VP208 Operator's Manual

Precautions for Handling

Place the printer on a surface that is flat and level.
Do not place the printer in an unlevel or slanted place. Doing
so could cause falling.
Do not put the printer on a location that
produces vibration.
Do not put the printer on a location that produces vibration.
Keep the printer out of high temperature and
humidity.
Do not put the printer on a location with high temperature or
humidity. High temperature and humidity may cause the
decrease of life span of the printer. (recommended
temperature: 10 to 30°)
Avoid dust.
Do not put the printer on a location exposed to dust. It may
cause failure or the decrease of life span of the printer.
Do not supply power near from a heater or
refrigerator.
Do not supply power from the power source near an electrical
device that requires a measurable amount of power. Voltage
reduction may cause malfunction or defect.
4

Checking the Including Items

Check the including items.
If there is a missing item, contact the SATO reseller or
technical support center.
Global Warranty
Program leaflet
BD address sticker
Battery
AC adapter (for Thailand, Vietnam)
▲Keep the Warranty and Packaging
The printer is guaranteed for six months after
installation for normal operation, and repair is free of
charge.
Keep the box and packaging
materials for this printer. When
requesting repairs, pack the
printer in the original box with
the original padding for
shipment.
Quick guide