SATO VP208 Operator's Manual page 32

4-4-8. AUTO ONLINE
ADVANCE SETTINGS
AUTO ONLINE
ENABLE DISABLE
Button name and
button pressing
Print/Select
Media feed/Enter
Print/Select +
Media feed/Enter
Print/Select +
Media feed/Enter
+ Press for 3 sec. or
more.
4-4-9. FEED AT BOOT
ADVANCE SETTINGS
FEED AT BOOT
ENABLE DISABLE
Even if the FEED AT BOOT is set to "DISABLE," the label roll
will be fed by one sheet upon turning the power on by
pressing the Power button, if "FEED AFTER ERROR" is set
to ENABLE.
* When the AC adapter is connected, FEED AT BOOT will
not be performed.
Button name and
button pressing
Print/Select
Media feed/Enter
Print/Select +
Media feed/Enter
Print/Select +
Media feed/Enter
+ Press for 3 sec. or
more.
30
Set the status for when the printer
is booted.
Default: ENABLE
ENABLE: When the printer is
booted, it enters the
online mode.
DISABLE: When the printer is
booted, it enters the
offline mode.
Screen and printer operation
Selects "ENABLE" or "DISABLE."
Changes to the FEED AT BOOT
screen.
Changes to the HEAD CHECK
(BOOT) screen (page 29).
Changes to the ADVANCE
SETTINGS screen (page 27).
Set whether the roll is fed by one
sheet when the printer is booted.
Default: DISABLE
ENABLE: The label roll is fed
when the printer is
booted.
DISABLE: The label roll is not
fed when the printer is
booted.
Screen and printer operation
Selects "ENABLE" or "DISABLE."
Changes to the FEED AFTER
ERROR screen.
Changes to the AUTO ONLINE
screen.
Changes to the ADVANCE
SETTINGS screen (page 27).
4-4-10. FEED AFTER ERROR
Set whether the label roll is to be
ADVANCE SETTINGS
fed by one sheet after an error is
FEED AFTER ERROR
generated.
ENABLE DISABLE
Default:
ENABLE: Feed the label roll after
DISABLE: Does not feed the label
• Timing to feed the label roll
When the printer is in online mode after the error is
released or the printer is turned on.
Button name and
Screen and printer operation
button pressing
Print/Select Selects "ENABLE" or "DISABLE."
Changes to the PRIORITY
Media feed/Enter
SETTING screen.
Print/Select + Changes to the FEED AT BOOT
Media feed/Enter screen.
Print/Select +
Media feed/Enter Changes to the ADVANCE
+ Press for 3 sec. or SETTINGS screen (page 27).
more.
4-4-11. PRIORITY SETTING
Set which takes priority, printer
ADVANCE SETTINGS
setting or command setting.
PRIORITY SETTING
COMMAND
Default: COMMAND
INTERNAL
COMMAND: The printer settings according to the received
data take priority.
INTERNAL: The printer's internal settings take priority.
Items for priority setting are print darkness, darkness range,
print speed, print offset, and sensor type.
Button name and
Screen and printer operation
button pressing
Print/Select Select "COMMAND" or "INTERNAL."
Changes to the ADVANCE
Media feed/Enter
SETTINGS screen (page 27).
Print/Select + Changes to the FEED AFTER
Media feed/Enter ERROR screen.
Print/Select +
Media feed/Enter Changes to the ADVANCE
+ Press for 3 sec. or SETTINGS screen (page 27).
more.
ENABLE
an error is generated.
roll after an error is
generated.