Manual Information; Precautions - SATO PV3 Connection Manual

1. Manual Information

This Wireless LAN manual provides information on the connection of a wireless network
with the mobile printer.
We at SATO maintain ongoing efforts to enhance and upgrade the functions and
quality of all our products. The following product specifications and/or user manual
content may be changed without prior notice.

2. Precautions

2-1 The printer has to be within 100m (Outdoors) from AP (Access point) to connect to a
Wireless LAN. Although up to 35m is possible to communicate indoors, Wireless LAN
performance could be affected by the environmental conditions, such as cement walls,
and impede signal strength performance. The printer's LCD shows the connection status of
the Wireless LAN:
- Indicates that the Wireless LAN is connected normally
- Indicates that the Wireless LAN password is wrong
- Indicates that the AP of the set SSID is not nearby
2-2 If a device (such as a microwave oven, Wireless LAN, etc.) that uses the same
frequency is present, transmission may be interrupted. Separate the printer and
Bluetooth-enabled device from such interrupting devices by a distance of at least 5m.
Rev. 1.00
Wireless LAN Connection Manua l
- 3 -