SATO VP208 Operator's Manual page 23

4-2-3-1 OPERATION MODE
Sets the operation mode.
OP SETTINGS
OPERATION MODE
Default: TEAR OFF:
TEAR OFF
CONTINUOUS
Button name and
Screen and printer operation
button pressing
Selects "CONTINUOUS" or "TEAR
Print/Select
OFF."
Changes to the SENSOR TYPE
Media feed/Enter
screen.
Print/Select + Changes to OP SETTINGS screen
Media feed/Enter (page 20).
Print/Select +
Media feed/Enter Changes to OP SETTINGS screen
+ Press for 3 sec. or (page 20).
more.
■ Continuous Print and Tear-Off
This printer has two operation modes, continuous print and
tear-off.
Continuous Print Operation Mode
The specified number of sheets will be continuously printed.
After printing the specified number of sheets or printing a
single sheet, the next print start position is placed at the print
head.
Media feed
direction
Simple cutter
Before
printing
Printing
End of
①
printing
After printing, the label is
fed to the cutter position.
Print head Media sensor
① ②
①
②
②
Tear-Off Operation Mode
After printing the specified number of sheets continuously, the roll
is fed to the cutter position automatically.
In this mode, the roll is easily cut manually after printing.
For the next printing, the roll is fed back to the print head and
printing will start.
Media feed
direction
Simple cutter
Before printing
Backfeed
Printing
End of
①
printing
Tear-off
①
operation
Cut
• T he figure above does not represent actual labels.
4-2-3-2 SENSOR TYPE
Sets the sensor type.
OP SETTINGS
SENSOR TYPE
Default: I-MARK
I-MARK
I-MARK: Detects the I-mark
NONE
NONE: Not using the media
Button name and
Screen and printer operation
button pressing
Print/Select Selects "I-MARK" or "NONE."
Changes to the ENERGY SAVING
Media feed/Enter
screen (page 22).
Print/Select + Changes to the OPERATION
Media feed/Enter MODE screen.
Print/Select +
Media feed/Enter Changes to OP SETTINGS screen
+ Press for 3 sec. or (page 20).
more.
Print head Media sensor
① ②
①
②
①
②
②
②
②
(black mark on the rear
of the label).
pitch sensor
21