SATO VP208 Operator's Manual page 27

4-3-1-4 PARAMETER SETTING (ISW)
Set the communication parameter
Bluetooth
ISW.
SETTING(ISW)
Hexadecimal display.
0012
Displayed when SCAN DETECT is
set to "ENABLE."
Initial value: 0012
Setting range: 0011 to 1000
• The setting value is enabled when the power is supplied
on the next time.
• If a value larger than ISI is set, an error sound is output
and the value cannot be set.
Button name and
Screen and printer operation
button pressing
Print/Select Select the digit.
Cursor position...the last digit
Media feed/Enter Cursor position...other than the
last digit
Cursor position...the most
significant digit
Print/Select +
Media feed/Enter
Cursor position...other than the most
significant digit
Print/Select +
Media feed/Enter Changes to the I/F SETTINGS
+ Press for 3 sec. or screen (page 23).
more.
• Changes to the PSI screen.
• Moves the cursor
• Changes to the ISI screen
(page 24).
• Moves the cursor
4-3-1-5 PARAMETER SETTING (PSI)
Set the communication parameter
Bluetooth
PSI.
SETTING(PSI)
Hexadecimal display.
0090
Initial value: 0090
Setting range: 0012 to 1000
• The setting value is enabled when the power is supplied
on the next time.
• If a value smaller than PSW is set, an error sound is
output and the value cannot be set.
• The setting is even only.
The last digit must be 0, 2, 4, 6, 8, A, C, or E.
Button name and
Screen and printer operation
button pressing
Print/Select Select the digit.
Cursor position...the last digit
Media feed/Enter
Cursor position...other than the
last digit
Cursor position...the most
significant digit
Print/Select +
Media feed/Enter
Cursor position...other than the most
significant digit
Print/Select +
Media feed/Enter Changes to the I/F SETTINGS
+ Press for 3 sec. or screen (page 23).
more.
• Changes to the PSW screen
(page 26).
• Moves the cursor
• If the scan detect is disabled,
changes to the SCAN
DETECT screen (page 24).
• If the scan detect is enabled,
changes to the ISW screen.
• Moves the cursor
25