SATO VP208 Operator's Manual page 22

4-2-2. FONT SETTINGS
Select FONT SETTINGS.
When one second has passed after the screen appears, the
message shown below scrolls on the lower part of the
screen.
BASIC SETTINGS
FONT SETTINGS
Message: Configure Font Settings.
Button name and
button pressing
Print/Select
Media feed/Enter
Print/Select +
Media feed/Enter
4-2-2-1 ZERO SLASH
FONT SETTINGS
ZERO SLASH
ENABLE DISABLE
Button name and
button pressing
Print/Select
Media feed/Enter
Print/Select +
Media feed/Enter
Print/Select +
Media feed/Enter
+ Press for 3 sec. or
more.
20
Screen and printer operation
Changes to OP SETTINGS
screen.
Changes to the ZERO SLASH
screen.
Changes to the BASIC SETTINGS
screen (page 16)
Set the zero slash.
Default: ENABLE
ENABLE: Print "0" with slash.
DISABLE: Print "0" without slash.
Screen and printer operation
Selects "ENABLE" or "DISABLE."
Changes to the CHARACTER
PITCH screen.
Changes to the FONT SETTINGS
screen.
Changes to the FONT SETTINGS
screen.
4-2-2-2 CHARACTER PITCH
Set the character pitch (set
FONT SETTINGS
whether to print based on width of
CHARACTER PITCH
each character or fixed character
ENABLE DISABLE
width).
Default:
ENABLE: Print with character
DISABLE: P rint with fixed character
Usable fonts: XS, XM, XB, XL
Button name and
Screen and printer operation
button pressing
Print/Select Selects "ENABLE" or "DISABLE."
Changes to the FONT SETTINGS
Media feed/Enter
screen.
Print/Select + Changes to the ZERO SLASH
Media feed/Enter screen.
Print/Select +
Media feed/Enter Changes to the FONT SETTINGS
+ Press for 3 sec. or screen.
more.
4-2-3. OP SETTINGS
Select OP SETTINGS.
When one second has passed after the screen appears, the
message shown below scrolls on the lower part of the
screen.
BASIC SETTINGS
OP SETTINGS
Message: Configure Operation Settings.
Button name and
Screen and printer operation
button pressing
Changes to the PRINT SETTINGS
Print/Select
screen (page 17).
Changes to the OPERATION
Media feed/Enter
MODE screen (page 21).
Print/Select + Changes to the BASIC SETTINGS
Media feed/Enter screen (page 16)
ENABLE
pitch.
width.