5.
Touch the shift key A or " to change the setting value.
Touch Enter
6.
to validate the setting.
Setting Instructions
D If dimension A on the copy is longer than 6.5 mm, decrease the setting value.
D If dimension A on the copy is shorter than 1.0 mm, increase the setting value.
*If the measurement does not fall within the specifications through one setting, try another
setting.
NOTE
Be sure to touch Enter before pressing the Panel Reset Key to return the copier to the Basic screen.
If this is not done, the old setting remains valid.
1156D162CA
Touch This Key if Measurement is Shorter.
Touch This Key if Measurement is Longer.
D-90