Minolta EP5000 Disassembly And Reassembly page 85

3. Call the "Adjust 1/2" menu to the screen.
4. Touch the select key ! or " to highlight "A3 Feed Direction Mag. Ratio".
5. Touch the shift key A or " to change the set value.
Touch Enter
6. to validate the setting.
Setting Instructions
D If the scale on the copy is longer than the actual scale, decrease the setting value.
D If the scale on the copy is shorter than the actual scale, increase the setting value.
*If the measurement does not fall within the specifications through one setting, try another
setting.
NOTE
Be sure to touch Enter before pressing the Panel Reset Key to return the copier to the Basic screen.
If this is not done, the old setting remains valid.
1156D138CA
1156D155CA
Touch This Key if Measurement is Shorter.
Touch This Key if Measurement is Longer.
D-78
1156D151CA