Minolta EP5000 Disassembly And Reassembly page 48

12. Remove the PC Drum Paper Separator Fingers and AIDC Sensor Board PWB-G as shown below.
PWB-G
Torsion Spring
* PC Drum Paper Separator Fingers
At removal and reinstallation, use care not to damage the tip of the fingers.
Also, use care not to get hurt by the tip of the fingers.
PC Drum Paper Separator Finger Installed
Top View
Assy
* Hook the torsion spring properly.
After installation, check that the
Paper Separator Fingers oper-
ate smoothly.
Bottom View
1156D063AA
D-41
1156D062AA